2013.01.30 14:18 Tempthation Everyday luxury. Le luxe au quotidien
2023.06.07 09:55 Vainiuss Honda CR-V vs Mazda 6
2023.06.07 09:42 AI0 AutoModerator performed action `sticky`
2023.06.07 09:36 thezzarry [PI] You are the barkeep of a very strange bar. It seems to attract monsters and gods, and is the unofficial neutral ground in most conflicts. Everyone likes you, and you are well protected. One day, some New Gods come in and try to fuck with you.
2023.06.07 09:24 Heartbeats_1 Paperless-ngx (Docker) Barcode problems
[2023-05-25 14:55:03,087] [INFO] [paperless.management.consumer] Adding /ussrc/paperless/consume/Gewerbe/Eingangs_Rechnung/20230525_134142.pdf to the task queue. [2023-05-25 14:55:03,094] [INFO] [paperless.management.consumer] Adding /ussrc/paperless/consume/20230525_134142.pdf to the task queue. [2023-05-25 14:55:07,891] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:08,004] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:08,165] [DEBUG] [paperless.barcodes] Barcode of type QRCODE found: 23E00517929 [2023-05-25 14:55:08,166] [DEBUG] [paperless.barcodes] Barcode of type CODE128 found: 00009 [2023-05-25 14:55:08,166] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:08,290] [DEBUG] [paperless.barcodes] Barcode of type QRCODE found: 23E00517929 [2023-05-25 14:55:08,291] [DEBUG] [paperless.barcodes] Barcode of type CODE128 found: 00009 [2023-05-25 14:55:08,291] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:08,331] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:08,458] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:08,522] [DEBUG] [paperless.barcodes] Barcode of type CODE128 found: 00010 [2023-05-25 14:55:08,523] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:08,648] [DEBUG] [paperless.barcodes] Barcode of type CODE128 found: 00010 [2023-05-25 14:55:08,649] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:08,668] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:08,796] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:08,849] [DEBUG] [paperless.barcodes] Barcode of type CODE128 found: 00011 [2023-05-25 14:55:08,850] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:08,989] [DEBUG] [paperless.barcodes] Barcode of type CODE128 found: 00011 [2023-05-25 14:55:08,989] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:09,014] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:09,136] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:09,196] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:09,306] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:09,338] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:09,441] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:09,533] [DEBUG] [paperless.barcodes] Barcode of type CODE39 found: VL0088449 [2023-05-25 14:55:09,533] [DEBUG] [paperless.barcodes] Barcode of type CODE128 found: 00012 [2023-05-25 14:55:09,533] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:09,629] [DEBUG] [paperless.barcodes] Barcode of type CODE39 found: VL0088449 [2023-05-25 14:55:09,629] [DEBUG] [paperless.barcodes] Barcode of type CODE128 found: 00012 [2023-05-25 14:55:09,629] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:09,689] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:09,779] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:09,941] [DEBUG] [paperless.barcodes] Barcode of type QRCODE found: BCD 002 1 SCT RG119608 [2023-05-25 14:55:09,941] [DEBUG] [paperless.barcodes] Barcode of type CODE39 found: RG119608 [2023-05-25 14:55:09,941] [DEBUG] [paperless.barcodes] Barcode of type CODE128 found: 00013 [2023-05-25 14:55:09,941] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:10,021] [DEBUG] [paperless.barcodes] Barcode of type QRCODE found: BCD 002 1 SCT RG119608 [2023-05-25 14:55:10,021] [DEBUG] [paperless.barcodes] Barcode of type CODE39 found: RG119608 [2023-05-25 14:55:10,021] [DEBUG] [paperless.barcodes] Barcode of type CODE128 found: 00013 [2023-05-25 14:55:10,021] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:10,091] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:10,166] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:10,257] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:10,326] [DEBUG] [paperless.barcodes] Scanning for barcodes using PYZBAR [2023-05-25 14:55:10,456] [INFO] [paperless.consumer] Consuming 20230525_134142.pdf [2023-05-25 14:55:10,460] [DEBUG] [paperless.consumer] Detected mime type: application/pdf [2023-05-25 14:55:10,462] [DEBUG] [paperless.consumer] Parser: RasterisedDocumentParser [2023-05-25 14:55:10,464] [DEBUG] [paperless.consumer] Parsing 20230525_134142.pdf... [2023-05-25 14:55:10,531] [INFO] [paperless.consumer] Consuming 20230525_134142.pdf [2023-05-25 14:55:10,535] [DEBUG] [paperless.consumer] Detected mime type: application/pdf [2023-05-25 14:55:10,536] [DEBUG] [paperless.consumer] Parser: RasterisedDocumentParser [2023-05-25 14:55:10,539] [DEBUG] [paperless.consumer] Parsing 20230525_134142.pdf... [2023-05-25 14:55:10,573] [DEBUG] [paperless.parsing.tesseract] Calling OCRmyPDF with args: {'input_file': PosixPath('/tmp/paperless/paperless-ngxzbpeluif/20230525_134142.pdf'), 'output_file': PosixPath('/tmp/paperless/paperless-1wqpexro/archive.pdf'), 'use_threads': True, 'jobs': '2', 'language': 'eng', 'output_type': 'pdfa', 'progress_bar': False, 'skip_text': True, 'clean': True, 'deskew': True, 'rotate_pages': True, 'rotate_pages_threshold': 12.0, 'sidecar': PosixPath('/tmp/paperless/paperless-1wqpexro/sidecar.txt')} [2023-05-25 14:55:10,627] [DEBUG] [paperless.parsing.tesseract] Calling OCRmyPDF with args: {'input_file': PosixPath('/tmp/paperless/paperless-ngxu8thnhgd/20230525_134142.pdf'), 'output_file': PosixPath('/tmp/paperless/paperless-djjj8xny/archive.pdf'), 'use_threads': True, 'jobs': '2', 'language': 'eng', 'output_type': 'pdfa', 'progress_bar': False, 'skip_text': True, 'clean': True, 'deskew': True, 'rotate_pages': True, 'rotate_pages_threshold': 12.0, 'sidecar': PosixPath('/tmp/paperless/paperless-djjj8xny/sidecar.txt')} [2023-05-25 14:56:11,255] [DEBUG] [paperless.filehandling] Document has storage_path 2 (Gewerbe_Eingangsrechnung/{correspondent}/{created_year}/{asn}-{title}) set [2023-05-25 14:56:11,267] [DEBUG] [paperless.filehandling] Document has storage_path 4 (Default/{correspondent}/{created_year}/{asn}-{title}) set [2023-05-25 14:56:11,273] [DEBUG] [paperless.filehandling] Document has storage_path 4 (Default/{correspondent}/{created_year}/{asn}-{title}) set [2023-05-25 14:56:11,277] [DEBUG] [paperless.filehandling] Document has storage_path 4 (Default/{correspondent}/{created_year}/{asn}-{title}) set [2023-05-25 14:56:59,398] [DEBUG] [paperless.filehandling] Document has storage_path 2 (Gewerbe_Eingangsrechnung/{correspondent}/{created_year}/{asn}-{title}) set [2023-05-25 14:56:59,433] [DEBUG] [paperless.filehandling] Document has storage_path 4 (Default/{correspondent}/{created_year}/{asn}-{title}) set [2023-05-25 14:56:59,442] [DEBUG] [paperless.filehandling] Document has storage_path 4 (Default/{correspondent}/{created_year}/{asn}-{title}) set [2023-05-25 14:56:59,455] [DEBUG] [paperless.filehandling] Document has storage_path 4 (Default/{correspondent}/{created_year}/{asn}-{title}) set [2023-05-25 14:57:07,981] [DEBUG] [paperless.parsing.tesseract] Using text from sidecar file [2023-05-25 14:57:07,982] [DEBUG] [paperless.consumer] Generating thumbnail for 20230525_134142.pdf... [2023-05-25 14:57:07,986] [DEBUG] [paperless.parsing] Execute: convert -density 300 -scale 500x5000> -alpha remove -strip -auto-orient /tmp/paperless/paperless-djjj8xny/archive.pdf[0] /tmp/paperless/paperless-djjj8xny/convert.webp [2023-05-25 14:57:08,009] [DEBUG] [paperless.parsing.tesseract] Using text from sidecar file [2023-05-25 14:57:08,011] [DEBUG] [paperless.consumer] Generating thumbnail for 20230525_134142.pdf... [2023-05-25 14:57:08,014] [DEBUG] [paperless.parsing] Execute: convert -density 300 -scale 500x5000> -alpha remove -strip -auto-orient /tmp/paperless/paperless-1wqpexro/archive.pdf[0] /tmp/paperless/paperless-1wqpexro/convert.webp [2023-05-25 14:57:09,952] [DEBUG] [paperless.consumer] Saving record to database [2023-05-25 14:57:09,952] [DEBUG] [paperless.consumer] Creation date from st_mtime: 2023-05-25 14:55:10.529478+02:00 [2023-05-25 14:57:09,968] [DEBUG] [paperless.consumer] Saving record to database [2023-05-25 14:57:09,968] [DEBUG] [paperless.consumer] Creation date from st_mtime: 2023-05-25 14:55:10.457478+02:00 [2023-05-25 14:57:10,125] [INFO] [paperless.handlers] Assigning document type Eingangs Rechnungen to 2023-05-25 20230525_134142 [2023-05-25 14:57:10,143] [INFO] [paperless.handlers] Tagging "2023-05-25 20230525_134142" with "Gewerbe" [2023-05-25 14:57:10,161] [INFO] [paperless.handlers] Assigning storage path Gewerbe_Eingangsrechnung to 2023-05-25 20230525_134142 [2023-05-25 14:57:10,223] [DEBUG] [paperless.filehandling] Document has storage_path 2 (Gewerbe_Eingangsrechnung/{correspondent}/{created_year}/{asn}-{title}) set [2023-05-25 14:57:10,236] [DEBUG] [paperless.filehandling] Document has storage_path 2 (Gewerbe_Eingangsrechnung/{correspondent}/{created_year}/{asn}-{title}) set [2023-05-25 14:57:10,238] [DEBUG] [paperless.consumer] Deleting file /tmp/paperless/paperless-ngxu8thnhgd/20230525_134142.pdf [2023-05-25 14:57:10,241] [DEBUG] [paperless.parsing.tesseract] Deleting directory /tmp/paperless/paperless-djjj8xny [2023-05-25 14:57:10,242] [INFO] [paperless.consumer] Document 2023-05-25 20230525_134142 consumption finishedDid you know what i am doing wrong?
2023.06.07 09:08 AI0 AutoModerator performed action `sticky`
2023.06.07 09:04 TheGeekyZoologist Jurassic World: The Hegemony of Biosyn (JWD rewrite) - Act III
2023.06.07 08:59 Yasharko Was asked by a guildie what other maplestory esque games are like as someone whos played a bunch hopefully yall get a chuckle out of it too.
![]() | submitted by Yasharko to Maplestory [link] [comments] |
2023.06.07 08:47 boogerlicktootsiepop Hers what I did, what would you do next? - 2010 2.5i
2023.06.07 08:46 esnezz Help me choose a body!
2023.06.07 08:41 AI0 AutoModerator performed action `sticky`
2023.06.07 08:28 Acrel-electric Application of Split Core Transformer in Industrial Cloud System of Vietnam
![]() | 摘 要:分析低压开口式电流互感器的原理,结合工程实例分析开口电流互感器在低压配电系统中,主要是改造项目中的应用及施工细节,为用户快速实现智能配电提供解决方案,该方案具有成本低、投资少、安装接线简便等优点,有利于低压智能配电的进一步推广和应用。 submitted by Acrel-electric to u/Acrel-electric [link] [comments] Abstract: this paper analyzes the principle of low voltage split core current transformer, analyzes the application and construction details of split core current transformer in low voltage distribution system with engineering examples, and provides a solution for users to realize intelligent distribution quickly. The scheme has the advantages of low cost, low investment and simple installation and wiring, which is beneficial to the further popularization and application of low voltage intelligent distribution. 关键词:开口式电流互感器;低压配电系统;改造项目;工作原理;应用;施工细节 Keywords: Split core current transformer; Low Voltage Distribution System; Renovation Project; Principle; Application; Construction Details
At present, most of the low voltage current transformers in the market are mainly used in the construction of new projects. Due to the rapid development of economy, the awareness of energy saving and emission reduction is gradually improved. The electrical characteristics of many enterprises are: 1)电气柜运行的时间长; 2)大部分电流互感器只是对系统电流进行测量,也没有相应的计量装置和保护装置,计量装置只有一块供电局的总表,而对所有车间电能无法进行考核,系统线路保护装置根本没有; 3)大部分线路干线为大规格铜排,拆卸需要大量的人力和时间,安装常规电流互感器不方便; 4)企业生产时间比较紧迫,不能长时间停电。 所以如需对上述电气进行改造,采用开口式电流互感器可以为用户节约大量的投资。 1)Long running time of electric gas cabinet; 2)Most of the current transformers only measure the current of the system, and there is no corresponding metering device and protection device. The measuring device has only one master table of the power supply bureau, but the electric energy of all workshops can not be assessed, and the system line protection device is not available at all,; 3)Most of the main lines are large size copper bar, it takes a lot of manpower and time to disassemble, it is not convenient to install conventional current transformer; 4)Enterprise production time is more urgent, can not long time blackout. Therefore, the use of split core current transformer can save a lot of investment for users. 2.产品设计Product design 1)结构特点 Structural characteristics 我司开口互感器型号齐全,有线缆专用的圆孔互感器,有适用于铜排的方孔互感器,本产品外壳材料采用PC/ABS合金,具有耐高温、机械强度高、环保等特点;铁芯采用有取向冷扎硅钢片,具有性能稳定,机械强度高,导磁率极高等特点;具体结构如图1所示。 Our company has a complete range of split core current transformer models, including round hole transformers for cables, and square hole transformers for copper bars., this product shell material is PC/ABS alloy, with high temperature resistance, high mechanical strength, environmental protection and other characteristics; The core adopts oriented cold bonded silicon steel sheet with stable performance, high mechanical strength and high magnetic conductivity. https://preview.redd.it/za37feyxdj4b1.png?width=554&format=png&auto=webp&s=9a3996036690916334f88a4f5a225cafdb567fdd 图1(方孔型,适用于铜排) Figure.1 骨架线圈,2-透明翻盖,3-安装螺母,4-接线端子,5-铁芯,6-弹簧,7-外壳,8-安装螺钉。 1-Skeleton coil ,2-transparent flip ,3-mount nut ,4-wiring terminal ,5-core ,6-spring ,7-shell ,8-mount screw. 2)开口电流互感器工作原理Working principle of open current transformer 开口低压电流互感器的工作原理如图1所示,开口电流互感器的一次绕组串联在被测线路中,I1为线路电流即电流互感器的一次电流,N1为电流互感器的一次匝数,I2电流互感器二次电流(通常为5A、1A),N2为电流互感器的二次匝数,Z2e为二次回路设备及连接导线阻抗。当一次电流从电流互感器P1端流进,P2端出,在二次Z2e接通的情况下,由电磁感应原理,电流互感器二次绕组有电流I2从S1流过,经Z2e至S2,形成闭合回路。由此可得电流在理想状态下I1×N1=I2×N2,所以有I1/I2=N1/N2=K,K为电流互感器的变比。但是由于开口式电流互感器的铁芯切开后,使铁芯的性能下将的比较厉害,所以必须将互感器的铁芯截面积加大,而且提高安匝数,将I1×N1=I2×N2≥100AN。 The working principle of the low voltage split core current transformer is shown in figure 1, The primary winding of the split core current transformer is connected in series in the line under test, I1 is the primary current of the current transformer, N1 is the primary turn of the current transformer, I2 current transformer secondary current (usually 5 A、1A), N2 is the secondary turns of the current transformer, Z2e for secondary circuit equipment and connection wire impedance. As the primary current flows through the P1 end of the current transformer, P2 out, If the secondary Z2e is connected, Based on electromagnetic induction, The secondary winding of the current transformer has current I2 flowing through the S1, Z2e to S2, Form a closed loop. Hence the I1×N1=I2×N2, of current in ideal state And so there's I1/I2=N1/N2=K, K is the ratio of current transformer. But since the core of the open current transformer is cut, Make the core performance will be more powerful, So the cross section of the transformer core must be increased, And increase the number of turns, I1×N1=I2×N2≥100 AN. https://preview.redd.it/9720q4fzdj4b1.png?width=554&format=png&auto=webp&s=ab40d65d80aca85338c2ea50eeaa4135b9330b9d 图2 Figure.2 注:图2中1-开口电流互感器的上体,2-开口电流互感器的下体,3-安装螺丝、螺母。 Note: Figure 2- Upper body of the 1- Open current transformer ,2- Lower body of the 2- Open current transformer ,3- Install screws, nuts 3)产品安装Product installation 如图2所示,将互感器的安装螺丝、螺母打开,卸下互感器的下体,将互感器的上体装入配电系统的一次母排,合上互感器的下体,将互感器的安装螺丝穿过互感器上、下体的固定孔,拧上螺母,将互感器的上、下体固定在一起,然后将互感器通过互感器两侧的安装固定孔将互感器固定在母排上,完成互感器的安装。然后将互感器的二次接到测量装置。整个过程比较快速简单。 As shown in figure 2, the installation screws and nuts of the transformer are opened, the lower body of the transformer is unloaded, the upper body of the transformer is loaded into the primary bus row of the distribution system, the lower body of the transformer is closed, the installation screw of the transformer passes through the fixed hole of the upper and lower body of the transformer, the nut is screwed, the upper and lower body of the transformer is fixed together, and then the transformer is fixed on the bus row through the installation fixing hole on both sides of the transformer to complete the installation of the transformer. Then connect the secondary of the transformer to the measuring device. The whole process is relatively fast and simple. 3.应用 Applications 开口电流互感器主要应用在低压配电改造项目中,开口式电流互感器同常规闭口互感器一样输出为标准的5A或1A,测量精度高,容量大,可与测量仪器、仪表配套使用,部分产品过载能力强可与装置配套使用。 Split core current transformer is mainly used in the low voltage distribution transformation project. Split core current transformer is output as standard 5 A or 1 A, as the conventional closed current transformer. The measuring precision is high and the capacity is large. 越南美的工厂为例如图3所示,每条线均需测量三相电流,将采集的电流信号供给电能表DTSD1352,组网之后数据传输到美的工业云系统。A相、B相、C相的可以选择我们的圆孔型开口互感器,每相额定电流为400A,采用AKH-0.66/K K-∮36 400/5开口电流互感器采集电流信号。现场无需拆线或者铜排。 For example, as shown in figure 3, each line needs to measure three-phase current, supply the collected current signal to the watt-hour meter DTSD1352, transmit the data to the industrial cloud system of the United States after networking. A phase, B phase, C phase can choose our round hole type open transformer, each phase rated current is 400 A, adopt AKH-0.66/K K-∮36 The 400/5 split core current transformer collects current signals.There is no need to remove wires or copper bars on site. https://preview.redd.it/f760n2rdij4b1.png?width=588&format=png&auto=webp&s=93dfff1536f6b5044d31870e611f9d4758fe04b2 图3 Figure.3 4.结束语Summary 开口式电流互感器已经成熟的在多个国家工矿企业工程配电监控系统中得到应用,降低了投资成本,提供工作效率及减轻工作难度。 Split core current transformer has been used in the engineering distribution monitoring system of industrial and mining enterprises in many countries, which reduces the investment cost, provides the working efficiency and reduces the working difficulty. 参考文献 Bibliography 1.Solutions For Enterprise Micro-grid System 2020.02 |
2023.06.07 08:24 TacoandRiot Color morph?
![]() | I know it’s hard to tell with different lighting, so I have a few photos in different light. The first photo is natural light, second is with some added light (our desk lamp), the third is him in his habitat and last one is him on my fiancés shoulder in natural light. I was told he’s a standard hypo but with some reacher I’m wondering if it has any red or blue bar in him? He’s about a year old, any ideas as to what morph he is exactly I’d love to know! His nails are definitely light in color (he already got his first mail trim!) which I know is a tell tale sign for hypos, but he’s just got so much color on his body that I’m wondering if all normal hypos look like him. Thanks for you help! I’m super excited to see any ideas as to his exact morph! submitted by TacoandRiot to BeardedDragons [link] [comments] |
2023.06.07 08:16 AI0 tresser performed action `unsticky`
2023.06.07 08:16 AI0 AutoModerator performed action `sticky`
2023.06.07 08:15 Vurtux Here are my (wants) suggestions for buffs from a GM Support
2023.06.07 08:00 NoDelivery6065 Mortality keeps me active
2023.06.07 08:00 AI0 AutoModerator performed action `sticky`
2023.06.07 07:54 Firm-Photograph1708 Ranking all gen 1 ladybug songs
2023.06.07 07:52 dm_bob Hinch Beltane addresses the new partnership between Balmorra Arms and the Alsakan Naval Academy
2023.06.07 07:00 RedDeadMods /r/RedDeadOnline Simple Questions & FAQ Thread.
Yes, you can play with friends on PC regardless of what store they bought it from. Even Steam GTA, uses Rockstar to launch the game.Q) Can we transfer our characters from PS4 and Xbox One to PC?
No, you cannot transfer characters to a different platform, e.g Xbox to PC. The game is cross-gen however, so if you play PS4 you can continue on PS5.Q) If I buy a next-gen console, can I play with friends on old-gen consoles?
Yes! The game is backwards compatible on console, so you can play with friends on PS4/PS5 or XB1/XBXQ) If I already own Red Dead Redemption 2, do I need to buy Red Dead Online again when it goes standalone?
No! Red Dead Online is still part of the RDR2 game.
Cash, the main currency in RDO that is earned through almost every activity.Q) What is the Outlaw pass?
Gold Bars, the premium currency in RDO that can be purchased using real money. You earn a small amount of gold for completing activities online.
Role Tokens, earned by levelling up in each role, used to unlock abilities & items for the five current roles.
The Outlaw Pass is an in-game purchase using the premium Gold currency that allows you to earn items/rewards as you level up.Q) What are Daily Challenges?
Outlaw Pass are only available for a limited time and once they finish, you can't access them again.
Every day at 6am UTC, you are given a new list of 7 daily challenges as well as 15 role daily challenges. They can range from hunting specific animals or finding certain herbs, to completing PVP/Freeroam events.Q) What are Free-roam events (role/normal)
Initially, you earn 0.1 Gold per completed challenge plus a bonus if you complete all 7 regular challenges.
After completing at least 1 challenge per day for 7 days, you then earn a little more gold per challenge each week before your daily challenge streak resets after 28 days.
Your daily challenge streak will then reset, and you start the process again.
In addition to this, there are also 3 daily challenges for each role available and you can do a max of 9 role daily challenges. Daily challenges for roles will also differ depending on your rank within each role.
Every 45 minutes, you'll receive an invite to a free-roam event. Free-roam events can be activities such as fishing, horse racing, archery competitions, or PVP. You earn XP + cash for completing.Q) What are ability cards?
There are also role specific events that happen every 90 minutes, you need to be ranked up and enrolled in each role before you'll see invites for these activities.
You can see the schedule for free-roam & role events here
Abilities in Red Dead Online are assigned to a character through Ability Cards. These are divided into two different types. Dead Eye cards that grant abilities only active during Dead Eye, while Passive cards add abilities that are always active, no matter what you do. Passive abilities are further divided into several different categories.Q) What are the playing styles online?
In Red Dead Online, it's not possible to assign all of the available abilities to the character, as there are only 4 slots available. One slot is used for a single Dead Eye card, while the remaining three slots are used for Passive abilities. Source.
Defensive: Players in Defensive mode will be indicated by a shield icon, will take reduced damage from enemy players, cannot be lassoed, melee attacked, executed or targeted with auto-aim. Defensive players will also be excluded from being targeted in PvP-related missions such as Player Assassination. Those who attack Defensive players receive hefty penalties via the Hostility system, while players who initiate conflict while in Defensive mode will be instantly pulled out of Defensive mode and also receive similar Hostility penalties.
Offensive: The Offensive playing style is set as the default and is how most players traditionally interact in Free Roam – free to engage in hostile contact with other players if you are prepared to accept the potential consequences.
At rank 25, you can buy an off-hand holster which allows you to equip a second handgun.Q) How do I change appearance
Press Left on the D Pad (Keyboard TBC) to bring the Online menu up > Scroll down to Online Options > Scroll down to Change AppearanceQ) How do I setup camp
Press Left on the D Pad (Keyboard TBC) to bring the Online menu up > Scroll down to camp options > Choose location for campQ) Where is the gun locker?
Camps can be used to access wardrobes, collect items you've ordered via the catalog, craft & cook and fast travel if upgraded.
A small camp is suitable for 1-4 posse members and costs $1 per in game day. A large camp is suitable for 1-7 posse members and costs $2 per in game day.
You unlock it through the trader role, then purchase it at Wilderness Outfitters in camp, and then it appears at your specific tent in camp.Q) How do I buy a dog?
At your camp, head to Cripps and access Wilderness Outfitters, from there you can select the dog option.Q) What can dogs be used for?
Looking cool at your camp and warning you of camp raids when you unlock the perk. Not really much else. (They're not companions like Dogmeat from Fallout 4)Q) I saw an item, but can't find it on PC or Xbox One.
Some items are exclusive to PS4, so you may see things promoted by Rockstar that aren't yet available on your platform or it may be from an old Outlaw Pass.Q) What is the best Horse
This post should help.Q) What are the best Weapons
Captain Balrick's arsenal should help you decideQ) What is the best ability card loadout
This post in the /RedDeadOnline mega-guide should help.Q) What is the best way to make money/gold
This post should help.Q) Where are the treasure maps located?
You can find them all here.
Yes! You can play in all roles concurrently.
Get started as a Bounty Hunter when you meet the Legendary Bounty Hunter in Rhodes and purchase the Bounty Hunter License. The standard cost is 15 Gold Bars.Q) What are legendary bounties?
Licensed Bounty Hunters can pick up work by visiting bounty boards located near law offices, post offices and train stations across the states. There is no shortage of criminals to be dealt with and the targets range in difficulty, from lone low-level petty thieves to notorious outlaws with armed protection details and a watchful eye. Taking on an armed gang or bringing multiple targets to justice is made easier with the help of a Posse, who will all earn a cut of the final bounty. And keep in mind, bringing in targets alive will yield a greater reward.
Reaching Bounty Hunter Rank 12 will open up the opportunity to take down other players with high bounties of $20 or more. Bounty Hunters will be notified through an invite about the opportunity to hunt down the wanted player when they’re nearby in a structured pursuit. The wanted player must escape (or surrender) within the allotted time and if captured, they’ll also have opportunities to escape and flee. If the Bounty Hunter brings the target in alive, they’ll receive an award while the criminal serves time.
Legendary bounties are high-tier bounties, they usually involve a mini-story/cut scene. They're also much tougher than a regular bounty.
There are 10 legendary bounties that can be access as part of the Bounty Hunter role and 3 that can be accessed (when they've all released) by purchasing the Prestigious Bounty Hunter upgrade.
our trusted camp companion, Cripps, has long dreamed of starting a trading outpost and you’re going to help him make it happen - by becoming a partner in the fledgling Cripps Trading Company. Combining Cripps’ lifetime of working with animal materials and your skills at hunting and frontier security, you’ll have the perfect ingredients to develop a thriving business.Q) Can I skip the medium wagon?
Once you agree to help Cripps, you can start turning your camp into a business by sourcing items for Cripps to convert into sellable goods. An investment of 15 Gold Bars to purchase a Butcher’s Table will get your business up and running.
Once you’re operational, you’ll provide Cripps with Materials through hunting animals – pristine pelts and carcasses will provide better yields. You’ll also take on Resupply Missions to acquire additional necessities through less than savory tactics. Once supplied, Cripps will begin turning the materials into sellable goods, which can then be sent out on low-risk local deliveries for payment or across greater distances for a premium.
Improve your hunting yields with a Hunting Wagon for larger hauls or upgrade your Delivery Wagons for larger sales. As business flourishes and your presence becomes known in the market, your competition may grow jealous of your success, so keep an eye out for raids on your camp. As your trade grows, you might consider purchasing a camp dog from Wilderness Outfitters. Not only are dogs great camp companions for all players, but a Trader of sufficient rank can teach their dog to warn of incoming attacks.
No, you need to buy the medium wagon, then the large wagon.Q) What can I sell to Cripps?
You can sell carcasses & small animals (e.g squirrels). Along with some animal parts, e.g feathers.Q) How long does it take Cripps to make goods after resupplying?
Cripps does not accept meat, fish or skinned carcasses.
Cripps requires materials and supplies to produce goods. You give him materials by donating carcasses and pelts. He uses two units of materials to produce one good. You either buy supplies or obtain them through resupply missions. Either way, that gives enough supplies to produce 25 goods. As long as both materials and supplies are available, Cripps produces 1 good every 2 minutes (1 in-game hour).
Seek out the mysterious travelling saleswoman Madam Nazar to acquire the Collector’s Bag and get started on the path of the Collector. It will cost 15 Gold Bars for access to collecting and selling rare items.Q) Where is Madam Nazar?
With Madam Nazar’s help, you will be able to explore the world finding valuable treasures, whether they’re discarded Tarot cards in abandoned camps, buried treasures unearthed with your trusty shovel, hidden family heirlooms and more.
Collect individual pieces and sell them off directly to Madam Nazar or collect entire sets for even more valuable sales. As you progress, you’ll unlock enhanced searching skills; more useful tools like a metal detector; benefits like increased carrying capacities; the ability for your horse to directly pluck and pass herbs to you while mounted, and more.
Madam Nazar can be located by completing a map/collection for her. Her location is posted daily on /RedDeadDailies - She changes location at 6am UTC time each day.Q) Who is Madam Nazar?
You can also find her using https://madamnazar.io/
Madam Nazar is the Collector role vendor, you can obtain maps, cosmetics & other items such as the shovel from her.Q) Why is Madam Nazar?
...Q) Where do you buy a shovel?
From Madam Nazar, it costs $350. If you need help finding her, check /RedDeadDailiesQ) Where do you buy a metal detector?
From Madam Nazar, it unlocks at level 5 and costs $700. If you need help finding her, check /RedDeadDailiesQ) Can you sell collector items individually or does it need to be a full set?
Yes, however you get far less money than you would if you sold a full collectionQ) Can you only have one collector map active?
Yes, if you try to open a second map, it may auto-close and almost looks like a bug, however, you should only try and activate one at any given time.
In the options menu (left on the D-pad, or L on PC), select "Camp & Properties" → "Moonshine Shack" → "Shack Location".Will be expanded upon soon...
2023.06.07 06:56 Jaydenpk How to make your 2v faster? And your experiences with building your mustang.
2023.06.07 06:51 pokethat First time Subaru owner
![]() | Overall feeling: This is my first car in 13 years. Got a 2023 outback onyx XT 2 weeks ago. It's amazing so far but for the usual infotainment quibbles. submitted by pokethat to Subaru_Outback [link] [comments] I've already put on some tux mats, I installed auto-dimming side mirrors myself, and put on the rear bumper coveprotector so my dogs don't scuff it up. This is a ridiculous upgrade from trusty kia compact sedan that was threatening to go into limp mode on the freeway on the way to the dealership. I did get it a few grand under msrp, yay Costco auto program. I kind of wanted the wilderness but I didn't care for the extra cost or the lower gearing and softer suspension for my mostly pavement driving. The Forester wilderness looked awesome too but the lack of a 200hp+ option made me gravitate away from it. I figure I can do a conservative lift down the line and get some of the recommended all-terrains for most of benefit of the wilderness trim. I will say that after discovering that dual x-mode works beyond 25 mph on the wilderness and not the onyx XT makes me a bit sad because launching with it on streets makes the car seem like a rocket. Future upgrades/accessories: -Replacing factory door speakers and tweeters -Noise deadening while speaker upgrade is happening (maybe) -Auto start stop eliminator (turbo bearing oil burning paranoia) -subaru rear seat cover - Subaru wind/rain window deflectors so I can crack the windows when I'm car camping. -mudflaps (mostly for looks) -undecided on front strut bar and stiffer rear sway bar. General questions: I have no idea what I'm doing when it comes to crossbars. I'd like to add a cargo carrier and another thing on top but a guide for dos and donts with the factory rails and bars would be appreciated. Apparently the stock twisty ones aren't super wide? If I get a kayak mount and put a modest kayak on it do I need cables in the front and back, and does that kill eyesight? Is the official hitch worth it? I don't feel like diy cutting up my bumper with a Dremel. I'd mostly be putting bike racks or a small cargo rack on it, maybe towing a small trailer thing one day. Would you guys recommend foagainst the Curt 2" option(s)? Are there any clearance issues with these (departure angle i think it's called)? Would I have to cut into the bumper to install a Curt hitch? Would you recommend the official Subaru mudflaps or are 3rd party nicer? Do 2023s still have parasitic drain and battery issues? I've not run it anything and I've been car camping twice already. |