This is a strange one. I broke down with starter motor failure on Friday evening and today I replaced the starter motor and the car starts just fine now. One thing that has happened though is that the heater blower fan for the climate control has stopped working. I don't think that the two events are related, but the fan not working has me scratching my head. I found a slightly melted 30A fuse (F22?) in the fusebox at the side of the dashboard (the fuse is intact though, it's not blown) and I've replaced it with a new one, but the handbook states that this should be a 40A fuse. I've stuck a 30A in for now but I still get no blower. The air con switch lights up when I press it and I can hear the air con pump turn on and off.
Are there any other fuses that I need to check? I've searched for fuse box diagrams and have found loads of them but they seem to have the fuse box images reversed, as if it's Europe or the US, not the UK. My dashboard fuse box is on the right. The numbers of fuses are also different.
The blower was running right up until I parked up and I came back to no starter motor on the key.
I'm confused at this point, how do I trouble shoot this?

I recently replaced my 20 year old system with a new AMERICAN STANDARD - 16 SEER - 2.5 Ton - Air Conditioner (new furnace as well). The unit is for the 2nd and 3rd floors of the house. Today was the first warm weather (~80 outside) where we’ve had to run it regularly and it seems to be cooling worse than our old system. Took over 90 mins to drop the internal temp from 73 to 72. I also noticed some draftiness above the new furnace/blower where it connects with the old ducting.
Two questions: 1) is this a potential problem? I expected the new system to cool more quickly 2) could the poor cooling and drafts be related?
Thanks!

I've been watching for a used wood lathe in my area, and what I see are 70-80% the price of a new one and still need some accessories. So I think I may just buy a new one,
My 1st one what are the thoughts on the Jet 1221VSD 12x21, searching reviews and other forums seems like this might be a good one. I have limited space, and I know its over 100lbs so I will likely be making a bench attachment for it (When in use, it sits on a perma mount to lock it on the bench, then I remove it from the bench and store it under. Do the same thing with my 13" planer as I have a VERY small area to work (like 1/3 of a single car gurage)
​
The used ones are frequently brands I've never seen before and google searches return very minimal info, plus they still need chucks, a few needed mounting parts or replacement banjo locks, tool rests and who knows what the belts and motors look like. For a 10-20% discount I think I'd just rather buy a new one heh

FT: New York City FC 0 - 0 New England Revolution

Venue: Yankee Stadium
LINE-UPS
New York City FC
Luis Barraza, Maxime Chanot, Stephen Turnbull, James Sands, Santiago Rodriguez, Brian Cufre, Justin Haak, Gabriel Pereira, Keaton Parks, Alfredo Morales, Richard Ledezma
Subs: Tony Alfaro, Talles Magno, Nico Benalcazar, Matt Freese, Mitja Ilenic, Andres Jasson, Kevin O'Toole, Matias Pellegrini, Gabe Segal
________________
New England Revolution
Djordje Petrovic, Jozy Altidore, Emmanuel Boateng, Bobby Wood, Dave Romney, Matt Polster, Christian Makoun, DeJuan Jones, Carles Gil, Andrew Farrell, Latif Blessing
Subs: Esmir Bajraktarevic, Gustavo Bou, Noel Buck, Earl Edwards Jr., Omar Gonzalez, Jack Panayotou, Justin Rennicks, Ben Sweat
MATCH EVENTS
3' Rosendo Mendoza signals a throw-in for New York City, close to New England's area.
3' Throw-in for New York City in the half of New England.
4' Rosendo Mendoza signals a free kick to New York City in their own half.
5' Free kick for New England in their own half.
5' Rosendo Mendoza signals a New England throw-in in New York City's half.
6' Free kick for New England in the half of New York City.
7' Ball safe as New England is awarded a throw-in in their half.
8' New England awarded a free kick in their own half.
9' Rosendo Mendoza signals a free kick to New York City in their own half.
9' New England to take a throw-in in New York City territory.
10' Matt Polster of New England gets in a strike, but is off target.
10' Ball goes out of play for a New York City goal kick.
12' New York City's Santiago Rodriguez gets in a shot on goal at Yankee Stadium. But the effort is unsuccessful.
12' In Bronx a free kick has been awarded the home team.
13' New York City have been awarded a corner by Rosendo Mendoza.
13' Keaton Parks's header is off-target for New York City.
13' New England have a goal kick.
14' A throw-in for the away team on the opposite half.
15' It's a goal kick for the away team in Bronx.
17' Can New York City get the ball into an attacking position from this throw-in in New England's half?
18' Gabriel Pereira gets his shot on target but fails to score for New York City.
19' Rosendo Mendoza signals a free kick to New England.
22' Bobby Wood for the away team is judged to be offside.
23' In Bronx New England drive forward through Bobby Wood. His shot is on target but it's saved.
23' Gabriel Pereira for New York City drives towards goal at Yankee Stadium. But the finish is unsuccessful.
23' Corner awarded to New York City.
24' New England awarded a free kick in their own half.
25' Corner awarded to New York City.
26' Throw-in for New York City at Yankee Stadium.
28' New England have been awarded a corner by Rosendo Mendoza.
31' Free kick for New York City in their own half.
31' Throw-in for New York City in the half of New England.
32' New England have been awarded a corner by Rosendo Mendoza.
32' Jozy Altidore (New England) gets up for a header but cannot keep the ball on target.
32' Rosendo Mendoza awards New York City a goal kick.
33' Rosendo Mendoza signals a New England throw-in in New York City's half.
33' Rosendo Mendoza signals a free kick to New York City in their own half.
34' New York City drive into the zone and Richard Ledezma is presented with a brilliant opportunity. But his strike hits the upright!
36' Goal kick for New York City at Yankee Stadium.
36' Can New York City get the ball into an attacking position from this throw-in in New England's half?
37' New York City awarded a free kick in their own half.
37' Throw-in high up the field for New York City in Bronx.
38' Can New York City capitalize from this throw-in deep inside New England's half?
38' Free kick New York City.
41' A throw-in for the home team on the opposite half.
42' New York City needs to be cautious. New England have an attacking throw-in.
43' Free kick for New York City in their own half.
43' Emmanuel Boateng for New England has been booked by Rosendo Mendoza and receives a first yellow card.
44' Rosendo Mendoza signals a free kick to New York City.
45' New England to take a throw-in in New York City territory.
45+3' Corner awarded to New York City.
46' The away team replace Jozy Altidore with Giacomo Vrioni.
46' Goal kick for New England at Yankee Stadium.
46' Rosendo Mendoza signals a New York City throw-in in New England's half.
46' New England will need to be alert as they defend a dangerous free kick from New York City.
47' New York City are coming forward and Brian Cufre gets in a strike, it misses the target, however.
47' It's a goal kick for the away team in Bronx.
48' Free kick for New York City in their own half.
49' New England's Giacomo Vrioni gets his shot away but it misses the target.
49' Rosendo Mendoza awards New York City a goal kick.
52' New England to take a throw-in in New York City territory.
53' Free kick New England.
53' In Bronx New England attack through Carles Gil. The finish is off target, however.
53' New York City have a goal kick.
54' Throw-in New York City.
54' Rosendo Mendoza signals a free kick to New York City just outside New England's area.
58' Rosendo Mendoza awards the away team a throw-in.
59' New England's Giacomo Vrioni is on target but unsuccessful.
60' New York City's Gabriel Pereira breaks free at Yankee Stadium. But the strike goes wide of the post.
61' New York City have been awarded a corner by Rosendo Mendoza.
61' Corner awarded to New York City.
61' Talles Magno is replacing Richard Ledezma for New York City at Yankee Stadium.
62' A throw-in for the away team on the opposite half.
63' Throw-in for New York City in their own half.
63' New York City awarded a throw-in in their own half.
64' Rosendo Mendoza awards the away team a throw-in.
65' Throw-in for New England close to the penalty box.
66' Ball goes out of play for a New York City goal kick.
67' Corner awarded to New York City.
68' Free kick for New England in the half of New York City.
69' New York City awarded a free kick in their own half.
70' Throw-in for New York City in their own half.
71' Can New England get the ball into an attacking position from this throw-in in New York City's half?
72' New York City awarded a throw-in in their own half.
73' New York City are pushing forward but Stephen Turnbull's finish is wide of the goal.
73' Ball goes out of play for a New England goal kick.
74' Nick Cushing (New York City) is making a second substitution, with Mitja Ilenic replacing Stephen Turnbull.
74' Matias Pellegrini is on a sub for Gabriel Pereira for New York City.
75' Bruce Arena is making the team's second substitution at Yankee Stadium with Gustavo Bou replacing Bobby Wood.
75' The away team have replaced Latif Blessing with Jack Panayotou. This is the third substitution made today by Bruce Arena.
75' It's a goal kick for the away team in Bronx.
76' In Bronx a free kick has been awarded the home team.
80' Rosendo Mendoza awards New York City a goal kick.
81' Maxime Chanot (New York City) has received a yellow card from Rosendo Mendoza.
81' In Bronx a free kick has been awarded the away team.
82' New England have been awarded a corner by Rosendo Mendoza.
83' New England have been awarded a corner by Rosendo Mendoza.
83' Matt Polster for New England gets in a strike but fails to hit the target.
83' Goal kick for New York City at Yankee Stadium.
85' Carles Gil is booked for the away team.
85' Rosendo Mendoza signals a free kick to New England.
86' Rosendo Mendoza signals a free kick to New York City in their own half.
87' Nick Cushing (New York City) is making a fourth substitution, with Tony Alfaro replacing Keaton Parks.
88' New England have a dangerous throw-in.
88' Free kick for New York City in their own half.
89' New England have a goal kick.
90+1' Ball goes out of play for a New England goal kick.
90+2' Brian Cufre (New York City) sees red and is sent off in Bronx!
90+4' Free kick New England.
90+5' New York City awarded a free kick in their own half.
90+6' New York City drives forward and Santiago Rodriguez gets in a shot. Without netting, however.
90+7' New England's Emmanuel Boateng misses with an attempt on goal.
90+7' Goal kick for New York City at Yankee Stadium.
SportsThreadder automatically generates match threads for soccer matches. You can request it for your subreddit

With warmer weather, I've attempted to begin using my AC for the first time since prior to Winter. It worked two days ago without any issue (first time running it), however, stopped working afterward and I haven't been able to get it to run yesterday or today. This is an HVAC system within an Apartment (full setup within a closet).
Yesterday (2nd day attempting to run / 1st day it didn't work), I noticed that the copper-ish/brown piping had some frost on it. When attempting to turn the thermostat to 'cool' it sounds like the HVAC itself turns on & I hear almost like a faucet/water sound. I've attempted to turn the fan from auto to on & the fan itself will not start when doing so. When switching the thermostat to heat, I had no issues with the HVAC system.
When turning the thermostat to cool, the blowemotor fan starts up slowly then stops a few seconds after.
The first thing I've done was replace the filter, however, it seems like everyone mentions letting the fan run after doing so - the problem here is that the fan won't turn on.
I've also taken the front panel off of the HVAC unit and attempted to turn the thermostat to 'cool' and give the tiny blowemotor fan a manual 'push' start, however, it doesn't kick in after my manual push.I've also tried to reconnect all the wiring to the thermostat to ensure nothing was loose.
I'd appreciate any thoughts/suggestions from you all here prior to me going straight to a technician, as I presume this will be a rather costly appointment.
Thanks in advance!
Edit: Unfortunately I do not have a voltage meter to test anything, so I'm a bit helpless on that front in terms of any troubleshooting/suggestions.

I killed my DCCS620B Chain Saw. I thought I put an 8AH battery in it but it was a 6AH one. When the juice was running out, I didn't want to climb out of the tree so I kept using it until the battery was 100% exhausted. Pressing the battery button did not show any bars.
When I got down I put a freshly charged 8AH battery on the saw. When I pulled the trigger it made a light whining sound but the chain did not move. I moved the chain manually and kept trying until the saw did not make any more sounds. At this time, the battery did not show any bars when I pushed the button. I tried another 8AH battery and had the same issue. Now, not only do I have a dead chain saw but also two dead batteries.
Tried all the tricks to reset/recharge the 8AH batteries without success. A volt meter shows them at just over 15v. The 6AH battery I was using when I killed the saw charged back up and is back in my leaf blower working without any issues.
I pulled the electric motor cover off the saw, unplugged the two connectors and tried a good battery. With the motor disconnected, the saw made the same noise. This time I stopped before I killed another battery. Even after sitting over night, it is still dead.
The batteries are definitely dead and I'm guessing the circuit got fried on the saw.
My question are:

1. What did I do wrong? From what I read, the 6AH batteries should be sufficient. Did running the saw until the battery was completely dead kill the saw?
2. Is the cost reasonable to fix the saw or is it more economical to just replace it?

Discussion Schedule and Navigation

• 05/26 - Takeminakata
• 05/29 - Ose (Christmas)
• 06/03 - Kirito
• 06/05 - Kagutsuchi (Jamboree)
• 06/09 - Gurangatch

Click here for a full list of discussions
Please vote for the upcoming featured discussions

• Character Survey

Character Discussion: Kirito

Character Info

• Artist: BomBom
• Voice: Yuu Amano
• Gender: Male
• Gate: Tokyo
• Guild: Genociders, unknown
• School: unknown

Relationships

• Liked by: Arc
• Disliked by: Inaba
• Likes: Oniwaka
• Dislikes: Protagonist

3☆ Kirito

Stats

• Title: Stranded Young Boy
• Element: Zero
• Attack Type: Slash
• Rarity: 3☆
• Party Cost: 8
• Max Base Stats:
  • HP: 6667.117
  • ATK: 3204.32
• Max Seeded Stats:
  • HP: 10282.062
  • ATK: 5946.52

Skills

Obtain	Skill Name	Trigger	Effect	Proc Chance
Default	Nebulous	After Moving	Apply Dazzle to enemies in Thrust range	30%-60%
		On Miss	Remove 500 HP from self and allies in Slash range	100%
LB1	Craving Solitude	When Hit	Apply Skill Lock to attacking units	35%-70%
		Before Hitting	Apply Darkness to hit units	40%-80%
		Status Resistance	Remove Nourishment, Unction, Blessing, and Regeneration	100%
		Before Being Attacked	Steal 250-500 HP from allies in front of self	40%-80%
LB2	Hierodulia Denier	After Moving	Apply Weakness to enemies in front of self	50%-100%
		Attack Modifier	Deal 100× damage against enemies with Evasion	100%
		Attack Modifier	Deal 1.5× damage against various statuses	100%
LB3	The Unrevealed	On Miss	Apply Dazzle to all enemies	15%-30%
		After Moving	Apply Nullify Debuff to self	45%-90%

• Hierodulia Denier:
  • Deal 1.5× damage against enemies with the following statuses:
    • Poison, Fatal Poison (including stackable versions), Burn (including stackable versions), Oppression, Paralysis, Fear, Curse, Dazzle, Charm, Freeze (including stackable versions), Countdown, Skill Lock, CS Lock, Bind, Stigma, Double Lock, Break, Nullify Buff, Possession, Weakness, Obstruct, Drain, Darkness, Buff Reversal, Conflagration, Doubt, Madness, Dirt, Weapon Change (Long Slash), CS Weapon Change (Long Slash)

Charge Skill

Name	Range	Extra Effect
[Whitechapel Murderer] Unending Castle of Fog	Slash	Restore 300-600 HP + Apply Crit to self

5☆ Kirito

Stats

• Title: Urban Alibi
• Element: Zero
• Attack Type: Slash
• Rarity: 5☆
• Party Cost: 24
• Max Base Stats:
  • HP: 8463.829
  • ATK: 4215.791
• Max Seeded Stats:
  • HP: 12039.444
  • ATK: 6874.876

Skills

Obtain	Skill Name	Trigger	Effect	Proc Chance
Default	Vanished in the Crowd	After Moving	Apply Dazzle to enemies in Shot range	45%-90%
		On Miss	Apply Evasion to self	45%-90%
		On Miss	Remove 500 HP from self and allies in Slash range	100%
LB1	Destitute and Unbound	When Hit	Apply Skill Lock to attacking units	40%-80%
		Before Hitting	Apply Darkness to hit units	40%-80%
		Before Hitting	Boost 4-8 CP to self	45%-90%
		Status Resistance	Remove Bind, Skill Lock, and Double Lock	50%-100%
		Status Resistance	Remove Nourishment, Unction, Blessing, and Regeneration	100%
		Before Being Attacked	Steal 250-500 HP from allies in front of self	40%-80%
LB2	Hierodulia Denier	After Moving	Apply Weakness to enemies in front of self	50%-100%
		Attack Modifier	Deal 100× damage against enemies with Evasion	100%
		Attack Modifier	Deal 1.5× damage against various statuses (see 3☆ for more info)	100%
LB3	Gone in the Twilight	On Miss	Apply Dazzle to all enemies	25%-50%
		After Moving	Apply Nullify Debuff to self	50%-100%
		Before Being Hit	Apply Evasion to self	15%-30%
		Phase Start	Apply Limit to self	45%-90%

Skill Evolutions

Replaces	Skill Name	Trigger	Effect	Proc Chance
Hierodulia Denier	Hierodulia-Denying Ripper	After Moving	Apply Weakness to enemies in Long Slash range	50%-100%
		Attack Modifier	Deal 100× damage against enemies with Evasion	100%
		Attack Modifier	Deal 1.5× damage against various statuses (see 3☆ for more info)	100%
		Phase Start	Apply Dazzle + Dazzle Weakening to all enemies
			Apply CS Lock to enemies within a 2-square diamond radius	50%-100%

Charge Skill

Name	Range	Extra Effect
[Whitechapel Murderer] Unending Castle of Fog	Long Slash	Restore 300-600 HP to self + Apply Crit++ and Evasion to self + Apply Double Lock to hit units and vertically-adjacent enemies

Resources

• housamo.wiki page:
  • 3☆ Kirito
  • 5☆ Kirito
• Housamo Skill DB:
  • Kirito

• What do you like or dislike about this character, design-wise, story-wise and gameplay-wise?
• What role does this character have, gameplay-wise?
• What other characters work well with them?
• What map types do they excel in?
• How do they compare to other characters with a similar role?
• Are they worth investing ATK, HP, level and skill seeds for?
• How does the character differ between their base 3☆ variant and their higher rarity?
• How do they compare to other limited characters?
• How have they improved with their skill evolutions?

Line Score - Game Over

	1	2	3	4	5	6	7	8	9	R	H	E	LOB
TOR	1	0	0	0	0	0	0	0	2	3	8	1	6
NYM	0	0	0	0	0	0	0	0	0	0	4	0	5

Box Score

NYM		AB	R	H	RBI	BB	SO	BA
CF	Nimmo	4	0	0	0	0	2	.290
SS	Lindor	4	0	0	0	0	2	.216
2B	McNeil	4	0	1	0	0	0	.286
1B	Alonso	4	0	1	0	0	0	.235
3B	Baty	4	0	0	0	0	3	.232
RF	Marte, S	3	0	1	0	0	1	.245
DH	Vientos	3	0	0	0	0	2	.172
LF	Canha	3	0	1	0	0	0	.247
C	Alvarez	3	0	0	0	0	0	.246

NYM	IP	H	R	ER	BB	SO	P-S	ERA
Verlander	6.0	5	1	1	3	8	117-77	4.25
Leone	1.0	0	0	0	0	1	9-6	4.50
Smith, Dr	1.0	1	0	0	0	0	7-6	3.66
Brigham	1.0	2	2	2	0	1	15-9	3.98

TOR		AB	R	H	RBI	BB	SO	BA
RF	Springer	4	1	1	1	0	2	.259
SS	Bichette	4	0	2	0	0	0	.335
1B	Guerrero Jr.	3	0	1	0	1	1	.286
DH	Belt	2	0	0	0	2	1	.252
3B	Chapman, M	4	0	0	0	0	3	.284
2B	Merrifield	4	1	2	0	0	0	.299
LF	Varsho	4	1	1	2	0	2	.214
C	Kirk	4	0	1	0	0	0	.254
CF	Kiermaier	4	0	0	0	0	1	.303

TOR	IP	H	R	ER	BB	SO	P-S	ERA
Bassitt	7.2	3	0	0	0	8	101-64	3.41
Mayza	0.1	0	0	0	0	1	5-3	1.80
Romano	1.0	1	0	0	0	1	10-8	3.13

Scoring Plays

Inning	Event	Score
T1	George Springer homers (8) on a fly ball to center field.	0-1
T9	Daulton Varsho homers (9) on a fly ball to right field. Whit Merrifield scores.	0-3

Highlights

Description	Length	Video
Bullpen availability for Toronto, June 2 vs Mets	0:07	Video
Bullpen availability for New York, June 2 vs Blue Jays	0:07	Video
Fielding alignment for New York, June 2 vs Blue Jays	0:11	Video
Fielding alignment for Toronto, June 2 vs Mets	0:11	Video
Starting lineups for Blue Jays at Mets - June 2, 2023	0:09	Video
Breaking down George Springer's home run	0:13	Video
A deep dive into George Springer's home run	0:09	Video
Breaking down Justin Verlander's pitches	0:08	Video
Justin Verlander's outing against the Blue Jays	0:22	Video
Breaking down Chris Bassitt's pitches	0:08	Video
Chris Bassitt's outing against the Mets	0:25	Video
Daulton Varsho: Home Run Statcast Analysis	0:10	Video
Sarah Langs discusses her long battle with ALS	4:43	Video
George Springer hits solo homer to center in the 1st	0:37	Video
Justin Verlander talks dominant year after Tommy John	13:40	Video
Sarah Langs is honored during the pregame ceremony	0:16	Video
Justin Verlander strikes out Varsho in the 6th	0:23	Video
Justin Verlander fans eight against the Blue Jays	2:08	Video
George Springer robs Pete Alonso of a base hit	0:29	Video
Daulton Varsho hits homer to right field in the 9th	0:27	Video

Decisions

Winning Pitcher	Losing Pitcher	Save
Bassitt (6-4, 3.41 ERA)	Verlander (2-3, 4.25 ERA)	Romano (14 SV, 3.13 ERA)

Game ended at 11:18 PM.

Blue Jays @ Mets - Fri, Jun 02

Game Status: Final - Score: 3-0 Blue Jays

Links & Info

• MLB Gameday
• Game Graphs
• Savant Gamefeed

	Blue Jays Batters	AB	R	H	RBI	BB	K	LOB	AVG	OBP	SLG
1	Springer - RF	4	1	1	1	0	2	1	.259	.326	.400
2	Bichette - SS	4	0	2	0	0	0	0	.335	.370	.532
3	Guerrero Jr. - 1B	3	0	1	0	1	1	1	.286	.350	.452
4	Belt - DH	2	0	0	0	2	1	3	.252	.375	.378
5	Chapman, M - 3B	4	0	0	0	0	3	4	.284	.362	.493
6	Merrifield - 2B	4	1	2	0	0	0	1	.299	.348	.390
7	Varsho - LF	4	1	1	2	0	2	3	.214	.275	.381
8	Kirk - C	4	0	1	0	0	0	0	.254	.350	.326
9	Kiermaier - CF	4	0	0	0	0	1	1	.303	.348	.493
	Totals	33	3	8	3	3	10	14

Blue Jays
BATTING: HR: Springer (8, 1st inning off Verlander, 0 on, 0 out); Varsho (9, 9th inning off Brigham, 1 on, 1 out). TB: Bichette 2; Guerrero Jr.; Kirk; Merrifield 2; Springer 4; Varsho 4. RBI: Springer (23); Varsho 2 (24). Runners left in scoring position, 2 out: Varsho 2. GIDP: Belt; Merrifield. Team RISP: 1-for-4. Team LOB: 6.
FIELDING: E: Guerrero Jr. (3, fielding).

	Mets Batters	AB	R	H	RBI	BB	K	LOB	AVG	OBP	SLG
1	Nimmo - CF	4	0	0	0	0	2	2	.290	.375	.425
2	Lindor - SS	4	0	0	0	0	2	2	.216	.289	.414
3	McNeil - 2B	4	0	1	0	0	0	2	.286	.361	.359
4	Alonso - 1B	4	0	1	0	0	0	1	.235	.331	.539
5	Baty - 3B	4	0	0	0	0	3	1	.232	.302	.376
6	Marte, S - RF	3	0	1	0	0	1	0	.245	.312	.310
7	Vientos - DH	3	0	0	0	0	2	1	.172	.194	.276
8	Canha - LF	3	0	1	0	0	0	0	.247	.330	.405
9	Alvarez - C	3	0	0	0	0	0	1	.246	.301	.509
	Totals	32	0	4	0	0	10	10

Mets
BATTING: 2B: McNeil (7, Bassitt). TB: Alonso; Canha; Marte, S; McNeil 2. Runners left in scoring position, 2 out: Alonso; McNeil; Vientos. Team RISP: 0-for-6. Team LOB: 5.
FIELDING: DP: 2 (Alonso-Lindor-Verlander; McNeil-Lindor-Alonso).

Blue Jays Pitchers	IP	H	R	ER	BB	K	HR	P-S	ERA
Bassitt (W, 6-4)	7.2	3	0	0	0	8	0	101-64	3.41
Mayza (H, 5)	0.1	0	0	0	0	1	0	5-3	1.80
Romano (S, 14)	1.0	1	0	0	0	1	0	10-8	3.13
Totals	9.0	4	0	0	0	10	0

Mets Pitchers	IP	H	R	ER	BB	K	HR	P-S	ERA
Verlander (L, 2-3)	6.0	5	1	1	3	8	1	117-77	4.25
Leone	1.0	0	0	0	0	1	0	9-6	4.50
Smith, Dr	1.0	1	0	0	0	0	0	7-6	3.66
Brigham	1.0	2	2	2	0	1	1	15-9	3.98
Totals	9.0	8	3	3	3	10	2

Game Info
Pitch timer violations: Nimmo (batter timer).
Pitches-strikes: Bassitt 101-64; Mayza 5-3; Romano 10-8; Verlander 117-77; Leone 9-6; Smith, Dr 7-6; Brigham 15-9.
Groundouts-flyouts: Bassitt 6-5; Mayza 0-0; Romano 0-1; Verlander 4-1; Leone 0-2; Smith, Dr 2-0; Brigham 1-1.
Batters faced: Bassitt 27; Mayza 1; Romano 4; Verlander 25; Leone 3; Smith, Dr 3; Brigham 5.
Umpires: HP: Nic Lentz. 1B: Charlie Ramos. 2B: Jeremie Rehak. 3B: Chad Fairchild.
Weather: 73 degrees, Partly Cloudy.
Wind: 2 mph, R To L.
First pitch: 8:41 PM.
T: 2:36 (1:31 delay).
Att: 42,637.
Venue: Citi Field.
June 2, 2023

Inning	Scoring Play	Score
Top 1	George Springer homers (8) on a fly ball to center field.	1-0 TOR
Top 9	Daulton Varsho homers (9) on a fly ball to right field. Whit Merrifield scores.	3-0 TOR

Team	Highlight
TOR	Bullpen availability for Toronto, June 2 vs Mets (00:00:07)
NYM	Bullpen availability for New York, June 2 vs Blue Jays (00:00:07)
NYM	Fielding alignment for New York, June 2 vs Blue Jays (00:00:11)
TOR	Fielding alignment for Toronto, June 2 vs Mets (00:00:11)
NYM	Starting lineups for Blue Jays at Mets - June 2, 2023 (00:00:09)
TOR	Analyzing Daulton Varsho's home run through bat tracking (00:00:09)
NYM	Sarah Langs talks battle with ALS (00:04:43)
TOR	Springer's leadoff homer (8) (00:00:37)
NYM	Verlander talks Cy Young season (00:13:40)
NYM	Sarah Langs' pregame ceremony (00:00:16)
NYM	Justin Verlander gets out of jam (00:00:23)
NYM	Justin Verlander's eight K's (00:02:08)
TOR	Varsho's two-run homer (9) (00:00:41)
TOR	Chris Bassitt's eight K's (00:01:55)
TOR	Jordan Romano records final out (00:00:16)
TOR	George Springer's diving catch (00:00:29)

	1	2	3	4	5	6	7	8	9		R	H	E	LOB
Blue Jays	1	0	0	0	0	0	0	0	2		3	8	1	6
Mets	0	0	0	0	0	0	0	0	0		0	4	0	5

Decisions

• Winner: Chris Bassitt (6-4, 3.41)
• Loser: Justin Verlander (2-3, 4.25)
• Save: Jordan Romano (14, 3.13)

Division Scoreboard

OAK 0 @ MIA 4 - Final
PHI 7 @ WSH 8 - Final
ATL 2 @ AZ 3 - Game Over
Next Mets Game: Sat, Jun 03, 04:10 PM EDT vs. Blue Jays
^{Last Updated: 06/02/2023 11:53:23 PM EDT}

Hey guys.. really need some advice. I have a 2019 Subaru Forester that was purchased new with warranty. Since then, we have lived in both Phoenix AZ and south Texas and have had AC stop working numerous times to where the dealership service center has had to replace the blower motor 5x (separate occasions)!!! We hear it start going out when it begins blowing at different strengths and will eventually die and stop blowing completely. The service dept solution at Subaru has only been to replace the AC blower motor.
First question… is that normal to have to replace the AC blower motor that many times in the 4 years we have had it?
Second.. what else could it be? Now that the warranty has run out, I’m fearing the actual underlying issue may be way more expensive to replace/repair (which is why the dealership service dept kept going with the cheaper temporary solution).
Third.. does anyone know if there is a recall with Subaru or someone to contact with subaru to help us find a solution for this well documented problem we have been dealing with since we purchased the car? I’m really bummed this has been a terrible experience with Subaru so far.
Any advice/help anyone can offer would be very appreciated.

Hey guys.. really need some advice. I have a 2019 Subaru Forester that was purchased new with warranty. Since then, we have lived in both Phoenix AZ and south Texas and have had AC stop working numerous times to where the dealership service center has had to replace the blower motor 5x (separate occasions)!!! We hear it start going out when it begins blowing at different strengths and will eventually die and stop blowing completely. The service dept solution at Subaru has only been to replace the AC blower motor.
First question… is that normal to have to replace the AC blower motor that many times in the 4 years we have had it?
Second.. what else could it be? Now that the warranty has run out, I’m fearing the actual underlying issue may be way more expensive to replace/repair (which is why the dealership service dept kept going with the cheaper temporary solution).
Third.. does anyone know if there is a recall with Subaru or someone to contact with subaru to help us find a solution for this well documented problem we have been dealing with since we purchased the car? I’m really bummed this has been a terrible experience with Subaru so far.
Any advice/help anyone can offer would be very appreciated.

Hey guys.. really need some advice. I have a 2019 Subaru Forester that was purchased new with warranty. Since then, we have lived in both Phoenix AZ and south Texas and have had AC stop working numerous times to where the dealership service center has had to replace the blower motor 5x (separate occasions)!!! We hear it start going out when it begins blowing at different strengths and will eventually die and stop blowing completely. The service dept solution at Subaru has only been to replace the AC blower motor.
First question… is that normal to have to replace the AC blower motor that many times in the 4 years we have had it?
Second.. what else could it be? Now that the warranty has run out, I’m fearing the actual underlying issue may be way more expensive to replace/repair (which is why the dealership service dept kept going with the cheaper temporary solution).
Third.. does anyone know if there is a recall with Subaru or someone to contact with subaru to help us find a solution for this well documented problem we have been dealing with since we purchased the car? I’m really bummed this has been a terrible experience with Subaru so far.
Any advice/help anyone can offer would be very appreciated.

Hey guys.. really need some advice. I have a 2019 Subaru Forester that was purchased new with warranty. Since then, we have lived in both Phoenix AZ and south Texas and have had AC stop working numerous times to where the dealership service center has had to replace the blower motor 5x (separate occasions)!!! We hear it start going out when it begins blowing at different strengths and will eventually die and stop blowing completely. The service dept solution at Subaru has only been to replace the AC blower motor.
First question… is that normal to have to replace the AC blower motor that many times in the 4 years we have had it?
Second.. what else could it be? Now that the warranty has run out, I’m fearing the actual underlying issue may be way more expensive to replace/repair (which is why the dealership service dept kept going with the cheaper temporary solution).
Third.. does anyone know if there is a recall with Subaru or someone to contact with subaru to help us find a solution for this well documented problem we have been dealing with since we purchased the car? I’m really bummed this has been a terrible experience with Subaru so far.
Any advice/help anyone can offer would be very appreciated.

I've spent far too much time researching an HVAC replacement for our house and I could use some feedback. As background, I'm replacing 20+ year old 80% gas furnace and 12 seer AC unit. While I could theoretically go all in on a cold climate head pump only, I've decided against that and am looking at a hybrid system. That being said, I am interested in good cold weather performance from the heat pump so that I can toggle the switchover point depending in changes in gas and electrical prices. We have solar, but it will not generate enough to fully offset the energy demands of a heat pump.
The house is 4,800 sq with very high ceilings in certain areas (30 feet) in the Denver area. Its a two story house with only one zone. We had air sealing done earlier this year and plan to have more insulation added to the attic in 2024. We are waiting on the insulation so that we can use the IRA tax credit again (2023 will be taken up by the air sealing project). After air sealing, the blower test results were 3444 cfm. I've gotten about 7 quotes and most did a manual J or some alternative/modified heat load modeling. The results suggest that the heat load at 0 F is between 50,000 btu and 70,000 btu. I am a little skeptical of the lower end of that scale because it came from someone trying to sell a cold climate heat pump only and we were maxing out the capacity of that particular heat pump, so they needed to smaller heat load to show that it could work.
I've narrowed my search down to Trane and Bosch based on the equipment itself and my confidence in the companies providing the quotes. The quotes are as follows:
Bosch: BOVA 20 seer with 120k BGH96 gas furnace (96%), and a bypass humidifier (to take the edge off) at ~20K.
Trane: XV19 Heat Pump with S9V2C 96% fully modulating furnace, with a bypass at ~22.5K
My understanding (and based on consulting NEEP) is that the Bosch equipment has better cold weather performance and will allow me to run the heat pump to colder temperatures. However, I also understand that while the outdoor Bosch unit is fully modulating, the fan inside furnace in the house is not and is only 2 stage. I'm not totally clear on how important this is or its effects, but the Trane dealer said that their system is fully modulating which will improve comfort and efficiency. Is the benefit of fully modulating worth the extra $2.5k? The Trane dealer really wants this deal and alluded to be willing to come down a little on the price, but I like the better cold weather performance of the Bosch. Both of the folks giving the quotes seem very competent and have gone above and beyond answering my overly detailed questions about these systems.
I would love some feedback to help me break through my decision paralysis. Thanks for your time and thoughts.
Edit: One other thing that the Trane dealer said is that their fans have a better "blower curve" which apparently helps them overcome static pressure and less than ideal ducting. Our house was built in the mid-90s so I'm sure they install ducting differently now, but I wouldn't think that it would be too bad in the whole scheme of things. Not sure how relevant that "Blower curve" is to our situation, but it is another piece of information that I'm trying to assess.

I've spent far too much time researching an HVAC replacement for our house and I could use some feedback. As background, I'm replacing 20+ year old 80% gas furnace and 12 seer AC unit. While I could theoretically go all in on a cold climate head pump only, I've decided against that and am looking at a hybrid system. That being said, I am interested in good cold weather performance from the heat pump so that I can toggle the switchover point depending in changes in gas and electrical prices. We have solar, but it will not generate enough to fully offset the energy demands of a heat pump.
The house is 4,800 sq with very high ceilings in certain areas (30 feet) in the Denver area. Its a two story house with only one zone. We had air sealing done earlier this year and plan to have more insulation added to the attic in 2024. We are waiting on the insulation so that we can use the IRA tax credit again (2023 will be taken up by the air sealing project). After air sealing, the blower test results were 3444 cfm. I've gotten about 7 quotes and most did a manual J or some alternative/modified heat load modeling. The results suggest that the heat load at 0 F is between 50,000 btu and 70,000 btu. I am a little skeptical of the lower end of that scale because it came from someone trying to sell a cold climate heat pump only and we were maxing out the capacity of that particular heat pump, so they needed to smaller heat load to show that it could work.
I've narrowed my search down to Trane and Bosch based on the equipment itself and my confidence in the companies providing the quotes. The quotes are as follows:
Bosch: BOVA 20 seer with 120k BGH96 gas furnace (96%), and a bypass humidifier (to take the edge off) at ~20K.
Trane: XV19 Heat Pump with S9V2C 96% fully modulating furnace, with a bypass at ~22.5K
My understanding (and based on consulting NEEP) is that the Bosch equipment has better cold weather performance and will allow me to run the heat pump to colder temperatures. However, I also understand that while the outdoor Bosch unit is fully modulating, the fan inside furnace in the house is not and is only 2 stage. I'm not totally clear on how important this is or its effects, but the Trane dealer said that their system is fully modulating which will improve comfort and efficiency. Is the benefit of fully modulating worth the extra $2.5k? The Trane dealer really wants this deal and alluded to be willing to come down a little on the price, but I like the better cold weather performance of the Bosch. Both of the folks giving the quotes seem very competent and have gone above and beyond answering my overly detailed questions about these systems.
I would love some feedback to help me break through my decision paralysis. Thanks for your time and thoughts.
Edit: One other thing that the Trane dealer said is that their fans have a better "blower curve" which apparently helps them overcome static pressure and less than ideal ducting. Our house was built in the mid-90s so I'm sure they install ducting differently now, but I wouldn't think that it would be too bad in the whole scheme of things. Not sure how relevant that "Blower curve" is to our situation, but it is another piece of information that I'm trying to assess.

Blue Jays @ Mets - Fri, Jun 02

Game Status: Final - Score: 3-0 Blue Jays

Links & Info

• Current conditions at Citi Field: 73°F - Partly Cloudy - Wind 2 mph, R To L
• TV: Blue Jays: SNET NOW App, TVA Sports (fr), SNET, Mets: SNY
• Radio: Blue Jays: Sportsnet.ca, SN590, Mets: Audacy (es), ESPN Deportes 1050 (es), WCBS 880
• MLB Gameday
• Game Graphs
• Savant Gamefeed

	Blue Jays Batters	AB	R	H	RBI	BB	K	LOB	AVG	OBP	SLG
1	Springer - RF	4	1	1	1	0	2	1	.259	.326	.400
2	Bichette - SS	4	0	2	0	0	0	0	.335	.370	.532
3	Guerrero Jr. - 1B	3	0	1	0	1	1	1	.286	.350	.452
4	Belt - DH	2	0	0	0	2	1	3	.252	.375	.378
5	Chapman, M - 3B	4	0	0	0	0	3	4	.284	.362	.493
6	Merrifield - 2B	4	1	2	0	0	0	1	.299	.348	.390
7	Varsho - LF	4	1	1	2	0	2	3	.214	.275	.381
8	Kirk - C	4	0	1	0	0	0	0	.254	.350	.326
9	Kiermaier - CF	4	0	0	0	0	1	1	.303	.348	.493
	Totals	33	3	8	3	3	10	14

Blue Jays
BATTING: HR: Springer (8, 1st inning off Verlander, 0 on, 0 out); Varsho (9, 9th inning off Brigham, 1 on, 1 out). TB: Bichette 2; Guerrero Jr.; Kirk; Merrifield 2; Springer 4; Varsho 4. RBI: Springer (23); Varsho 2 (24). Runners left in scoring position, 2 out: Varsho 2. GIDP: Belt; Merrifield. Team RISP: 1-for-4. Team LOB: 6.
FIELDING: E: Guerrero Jr. (3, fielding).

	Mets Batters	AB	R	H	RBI	BB	K	LOB	AVG	OBP	SLG
1	Nimmo - CF	4	0	0	0	0	2	2	.290	.375	.425
2	Lindor - SS	4	0	0	0	0	2	2	.216	.289	.414
3	McNeil - 2B	4	0	1	0	0	0	2	.286	.361	.359
4	Alonso - 1B	4	0	1	0	0	0	1	.235	.331	.539
5	Baty - 3B	4	0	0	0	0	3	1	.232	.302	.376
6	Marte, S - RF	3	0	1	0	0	1	0	.245	.312	.310
7	Vientos - DH	3	0	0	0	0	2	1	.172	.194	.276
8	Canha - LF	3	0	1	0	0	0	0	.247	.330	.405
9	Alvarez - C	3	0	0	0	0	0	1	.246	.301	.509
	Totals	32	0	4	0	0	10	10

Mets
BATTING: 2B: McNeil (7, Bassitt). TB: Alonso; Canha; Marte, S; McNeil 2. Runners left in scoring position, 2 out: Alonso; McNeil; Vientos. Team RISP: 0-for-6. Team LOB: 5.
FIELDING: DP: 2 (Alonso-Lindor-Verlander; McNeil-Lindor-Alonso).

Blue Jays Pitchers	IP	H	R	ER	BB	K	HR	P-S	ERA
Bassitt (W, 6-4)	7.2	3	0	0	0	8	0	101-64	3.41
Mayza (H, 5)	0.1	0	0	0	0	1	0	5-3	1.80
Romano (S, 14)	1.0	1	0	0	0	1	0	10-8	3.13
Totals	9.0	4	0	0	0	10	0

Mets Pitchers	IP	H	R	ER	BB	K	HR	P-S	ERA
Verlander (L, 2-3)	6.0	5	1	1	3	8	1	117-77	4.25
Leone	1.0	0	0	0	0	1	0	9-6	4.50
Smith, Dr	1.0	1	0	0	0	0	0	7-6	3.66
Brigham	1.0	2	2	2	0	1	1	15-9	3.98
Totals	9.0	8	3	3	3	10	2

Game Info
Pitch timer violations: Nimmo (batter timer).
Pitches-strikes: Bassitt 101-64; Mayza 5-3; Romano 10-8; Verlander 117-77; Leone 9-6; Smith, Dr 7-6; Brigham 15-9.
Groundouts-flyouts: Bassitt 6-5; Mayza 0-0; Romano 0-1; Verlander 4-1; Leone 0-2; Smith, Dr 2-0; Brigham 1-1.
Batters faced: Bassitt 27; Mayza 1; Romano 4; Verlander 25; Leone 3; Smith, Dr 3; Brigham 5.
Umpires: HP: Nic Lentz. 1B: Charlie Ramos. 2B: Jeremie Rehak. 3B: Chad Fairchild.
Weather: 73 degrees, Partly Cloudy.
Wind: 2 mph, R To L.
First pitch: 8:41 PM.
T: 2:36 (1:31 delay).
Att: 42,637.
Venue: Citi Field.
June 2, 2023

Inning	Scoring Play	Score
Top 1	George Springer homers (8) on a fly ball to center field.	1-0 TOR
Top 9	Daulton Varsho homers (9) on a fly ball to right field. Whit Merrifield scores.	3-0 TOR

Team	Highlight
TOR	Bullpen availability for Toronto, June 2 vs Mets (00:00:07)
NYM	Bullpen availability for New York, June 2 vs Blue Jays (00:00:07)
NYM	Fielding alignment for New York, June 2 vs Blue Jays (00:00:11)
TOR	Fielding alignment for Toronto, June 2 vs Mets (00:00:11)
NYM	Starting lineups for Blue Jays at Mets - June 2, 2023 (00:00:09)
TOR	Analyzing Daulton Varsho's home run through bat tracking (00:00:09)
NYM	Sarah Langs talks battle with ALS (00:04:43)
TOR	Springer's leadoff homer (8) (00:00:37)
NYM	Verlander talks Cy Young season (00:13:40)
NYM	Sarah Langs' pregame ceremony (00:00:16)
NYM	Justin Verlander gets out of jam (00:00:23)
NYM	Justin Verlander's eight K's (00:02:08)
TOR	Varsho's two-run homer (9) (00:00:41)
TOR	Chris Bassitt's eight K's (00:01:55)
TOR	Jordan Romano records final out (00:00:16)
TOR	George Springer's diving catch (00:00:29)

	1	2	3	4	5	6	7	8	9		R	H	E	LOB
Blue Jays	1	0	0	0	0	0	0	0	2		3	8	1	6
Mets	0	0	0	0	0	0	0	0	0		0	4	0	5

Decisions

• Winner: Chris Bassitt (6-4, 3.41)
• Loser: Justin Verlander (2-3, 4.25)
• Save: Jordan Romano (14, 3.13)

Division Scoreboard

OAK 0 @ MIA 4 - Final
PHI 7 @ WSH 8 - Final
ATL 2 @ AZ 3 - Game Over
^{Last Updated: 06/02/2023 11:52:24 PM EDT}

My AC will be running cool with no issues. Then without notice all the sudden the house starts feeling hot. When I point the infrared thermometer at one of the vents the air coming out is about 76. The unit is still running and blowing air it is just room temp air coming out.
When the system is running fine the air coming out will be between 58-60.
When this happens I turn the system off from the thermostat and wait about 5 mins. Turn it back on and it will run fine again.
Rinse and repeat every couple hours (sometimes days).
1st pro - shot of frion. Happened again same day.
1st pro (second visit) - replaced blower motor. Still happened.
2nd pro - completely dumbfounded. Told me to call him back when it’s happening again. This isn’t realistic as it means I would have to let everything run, while blowing warm air, until he can get to my house. Also could happen at any time.
I need some help. Has anyone come across this before?
Nest Thermostat that I’m confident is wired right. No problems with heat in winter using same thermostat. Only impact is on AC.

Inefficient Light Bulb Ban Bill

A
B I L L
T O
Ban the sale and use of environmentally inefficient light bulbs.
BE IT ENACTED by the King’s most Excellent Majesty, by and with the advice and consent of the Lords and Commons, in this present Parliament assembled, and by the authority of the same, as follows:—
Section 1: Definitions
(1) "Incandescent light bulb" means a general service lamp that produces light by heating a filament in a glass bulb filled with an inert gas or a vacuum.
(2) "Halogen light bulb" means a type of incandescent light bulb that uses a halogen gas to increase energy efficiency and lifespan.
(3) "Fluorescent light bulb" means a type of light bulb that uses an electric current to excite a gas, which then produces ultraviolet light that is converted to visible light by a phosphor coating on the inside of the bulb.
(4) "LED" refers to inorganic light-emitting diodes, and means a technology which -

(a) light is produced from a solid state device embodying a p-n junction of inorganic material, and
(b) the junction emits optical radiation when excited by an electrical current

Section 2: Ban on Incandescent, Halogen and Fluorescent Light Bulbs
(1) The import, manufacture, distribution, and sale of incandescent, halogen, and fluorescent light bulbs shall be prohibited.
(2) No later than three years after the date of assent, the use of incandescent, halogen, and fluorescent light bulbs in all public buildings shall be banned.
Section 3: Exemptions
(1) This Act does not apply to incandescent, halogen or fluorescent light bulbs specifically tested and approved to operate --

(a) in potentially explosive atmospheres,
(b) for emergency use,
(c) in radiological installations,
(d) in or on military or civil defence establishments, equipment, ground vehicles, marine equipment or aircraft,
(e) in or on motor vehicles, their trailers and systems, interchangeable towed equipment, components and separate technical units,
(f) in or on civil aviation aircraft,
(g) in railway vehicle lighting,
(h) in medical devices.

(2) For the purposes of this paragraph “specifically tested and approved” means that, in relation to an operating condition or application, the light source or separate control gear—

(a) has been specifically tested for that operating condition or application, in accordance with standards produced by an international standardising body;
(b) is accompanied by evidence in the form of a certificate, type approval mark or test report that the product has been specifically approved for that operating condition or application; and
(c) is placed on the market specifically for that operating condition or application, as evidenced by
(i) the information in the technical documentation; and
(ii) except in a case to which sub-paragraph (1)(d) applies, information on the packaging and any advertising or marketing materials.

(3) The government may grant exemptions to this Act for certain areas or industries where alternative options are not yet available or would impose undue financial burden.
(4) This act does not apply to sodium vapour lamps.
Section 4: LED procurement
(1) Subject to Section 3, replacement of light bulbs as required under section 2 shall be of LED-type.
Section 5: Penalties
(1) Any person found guilty of being concerned in the import, manufacture, distribution or sale of any goods prohibited in this Act, shall be liable—

(a) on summary conviction, to a penalty of £20,000 or of three times the value of the goods, whichever is the greater, or to imprisonment for a term not exceeding 6 months, or to both; or
(b) on conviction on indictment, to a penalty of any amount, or to imprisonment for a term not exceeding 7 years, or to both.

Section 6: Extent, commencement and short title
(1) This Act extends to England only.
(2) This bill shall come into force six months after receiving Royal Assent.
(3) This Act may be cited as the Inefficient Light Bulb Ban Act 2023.
This Bill was written by Ruijormar, Secretary of State for Energy and Climate Change on behalf of His Majesty’s 32nd Government and was inspired by the real life Ecodesign for Energy-Related Products and Energy Information (Lighting Products) Regulations 2021
​
Opening Speech:
My Lords,
As of today, close to two thirds of light bulbs sold in the UK are LED lights. These have, on average, a 5 times longer lifetime and 80% less power consumption than the alternatives. A complete shift to LED would reduce carbon emissions by 1.26 million tonnes per year, while also saving consumers an average of 75£ per year on energy bills. I urge the House to support this bill, so that we may turn off the power on inefficient lighting and shine a light on a more sustainable future.
This division shall end on 5th June at 10pm BST.

Blue Jays (30-27) @ Mets (30-27)

First Pitch: 7:10 PM at Citi Field

Team	Starter	TV	Radio
Blue Jays	Chris Bassitt (5-4, 3.80 ERA)	SNET	SN590
Mets	Justin Verlander (2-2, 4.80 ERA)	SNY	WCBS 880, ESPN-1050 (ES)

MLB	Fangraphs	Baseball Savant	Reddit Stream	Discord	IRC Chat
Gameday	Game Graph	Strikezone Map	Live Comments	Discord	Libera: ##baseball

Line Score - Game Over

	1	2	3	4	5	6	7	8	9	R	H	E	LOB
TOR	1	0	0	0	0	0	0	0	2	3	8	1	6
NYM	0	0	0	0	0	0	0	0	0	0	4	0	5

Box Score

NYM		AB	R	H	RBI	BB	SO	BA
CF	Nimmo	4	0	0	0	0	2	.290
SS	Lindor	4	0	0	0	0	2	.216
2B	McNeil	4	0	1	0	0	0	.286
1B	Alonso	4	0	1	0	0	0	.235
3B	Baty	4	0	0	0	0	3	.232
RF	Marte, S	3	0	1	0	0	1	.245
DH	Vientos	3	0	0	0	0	2	.172
LF	Canha	3	0	1	0	0	0	.247
C	Alvarez	3	0	0	0	0	0	.246

NYM	IP	H	R	ER	BB	SO	P-S	ERA
Verlander	6.0	5	1	1	3	8	117-77	4.25
Leone	1.0	0	0	0	0	1	9-6	4.50
Smith, Dr	1.0	1	0	0	0	0	7-6	3.66
Brigham	1.0	2	2	2	0	1	15-9	3.98

TOR		AB	R	H	RBI	BB	SO	BA
RF	Springer	4	1	1	1	0	2	.259
SS	Bichette	4	0	2	0	0	0	.335
1B	Guerrero Jr.	3	0	1	0	1	1	.286
DH	Belt	2	0	0	0	2	1	.252
3B	Chapman, M	4	0	0	0	0	3	.284
2B	Merrifield	4	1	2	0	0	0	.299
LF	Varsho	4	1	1	2	0	2	.214
C	Kirk	4	0	1	0	0	0	.254
CF	Kiermaier	4	0	0	0	0	1	.303

TOR	IP	H	R	ER	BB	SO	P-S	ERA
Bassitt	7.2	3	0	0	0	8	101-64	3.41
Mayza	0.1	0	0	0	0	1	5-3	1.80
Romano	1.0	1	0	0	0	1	10-8	3.13

Scoring Plays

Inning	Event	Score
T1	George Springer homers (8) on a fly ball to center field.	0-1
T9	Daulton Varsho homers (9) on a fly ball to right field. Whit Merrifield scores.	0-3

Highlights

Description	Length	Video
Bullpen availability for Toronto, June 2 vs Mets	0:07	Video
Bullpen availability for New York, June 2 vs Blue Jays	0:07	Video
Fielding alignment for New York, June 2 vs Blue Jays	0:11	Video
Fielding alignment for Toronto, June 2 vs Mets	0:11	Video
Starting lineups for Blue Jays at Mets - June 2, 2023	0:09	Video
Breaking down George Springer's home run	0:13	Video
A deep dive into George Springer's home run	0:09	Video
Breaking down Justin Verlander's pitches	0:08	Video
Justin Verlander's outing against the Blue Jays	0:22	Video
Breaking down Chris Bassitt's pitches	0:08	Video
Chris Bassitt's outing against the Mets	0:25	Video
Daulton Varsho: Home Run Statcast Analysis	0:10	Video
Sarah Langs discusses her long battle with ALS	4:43	Video
George Springer hits solo homer to center in the 1st	0:37	Video
Justin Verlander talks dominant year after Tommy John	13:40	Video
Sarah Langs is honored during the pregame ceremony	0:16	Video
Justin Verlander strikes out Varsho in the 6th	0:23	Video
Justin Verlander fans eight against the Blue Jays	2:08	Video
George Springer robs Pete Alonso of a base hit	0:29	Video
Daulton Varsho hits homer to right field in the 9th	0:27	Video

Decisions

Winning Pitcher	Losing Pitcher	Save
Bassitt (6-4, 3.41 ERA)	Verlander (2-3, 4.25 ERA)	Romano (14 SV, 3.13 ERA)

Game ended at 11:18 PM.
Remember to sort by new to keep up!