Samsung dryer serial number lookup

I want to increase the pdf_downloads number every time someone downloads pdf_file . I can't figure out how to do that in viewset. Want to do that in Retrive endpoint.
Here are the codes
models.py

class Article(models.Model): title = models.TextField() slug = models.SlugField(max_length=500) content= models.TextField() pdf_file = models.FileField(upload_to='pdf_file/%Y/%M', blank=True, null=True) pdf_downloads = models.PositiveIntegerField(default=0, blank=False, null=False, db_index=True) 

serializers.py

class ArticleSerializer(serializers.ModelSerializer): class Meta: model = Article fields = '__all__' 

views.py

class ArticleViewSet(viewsets.ReadOnlyModelViewSet): queryset = Article.objects.all() serializer_class = ArticleSerializer 

Hi,
I have a CMH32GX5M2B5600C36 RAM in my system. I want to upgrade this to 64 gb, but I saw that there is another version (?) of the same RAM. CMH32GX5M2B5600C36K is the serial number.
Are those two compatible? I looked at the details but couldn't find any difference except the additional K on the serial number.

Hi all,
I just bought a ReMarkable 2 tablet and I am unable to connect to it through ssh on my Ubuntu 20 laptop. Basically the problem is that I see a wired connection being displayed on network manager but no IP address is obtained.
This is the dmesg output of when I connect the ReMarkable 2 through USB:
[ 2733.204679] usb 1-4: new high-speed USB device number 15 using xhci_hcd [ 2733.357178] usb 1-4: New USB device found, idVendor=04b3, idProduct=4010, bcdDevice= 5.04 [ 2733.357192] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2733.357197] usb 1-4: Product: RNDIS/Ethernet Gadget [ 2733.357202] usb 1-4: Manufacturer: reMarkable [ 2733.357206] usb 1-4: SerialNumber: 0 [ 2733.361549] cdc_ether 1-4:2.0 usb0: register 'cdc_ether' at usb-0000:00:14.0-4, CDC Ethernet Device, 9a:f1:d4:ff:d6:6a [ 2733.382645] cdc_ether 1-4:2.0 enx9af1d4ffd66a: renamed from usb0
Could someone help me?

The width is 35.5 in, just slightly under the width of most larger-capacity refrigerators. That leaves a 33-inch refrigerator, and I don't know the brand to go for. I was looking at the Cafe, but the reviews don't seem very good for that. GE seems reliable, so I have this one in mind. I am looking for a french door that is preferably 2-2.5k.
I would also like to hear what washer and dryer to get. I sense that the general consensus is to avoid Samsung since it is difficult to repair. Thanks!

My 2017 Macbook Air's trackpad and keyboard aren't working expect for the initial password screen and when i'm using an external mouse and keyboard. Anybody know how to fix this?
These are the configs:
​
https://preview.redd.it/qpobips7e8ra1.png?width=494&format=png&auto=webp&s=19b108274729e91291662f28f9c6a92e21223ce3

Hello so I have a physical SIM and an eSIM on my S23. The physical SIM is my main number & I want to use the eSIM from Visible for data. However I don't see the options for SIM preferences? I can only disable sims or change the primary.
Here's a screenshot of my sim manager.
SIM Manager
As you can see there's no option to choose which sim to use for data, calls, & messages. Hitting more SIM settings only gives me options to delete eSIMS?
Looking through Samsung support forums, others have the same issue, but I have yet to find a solution to prefer my secondary SIM for data without disabling the primary. Any help or suggestions?

for lazy folk, a new standalone Oswald featurette thing is in pre production right now — peep da peak
This will be a pretty long post and cover Oswald’s post-Junction-Point treatment inside of Disney, and contrary to what many think, he was not ever abandoned. It will also cover new discoveries about the future I have made, including a rerelease for Oswald this April 14th, and a completely new “short” (not too short, though it is self contained and not a series) that will likely be released within the next year. The date this was posted on may make it seem fake or a troll, but I will back up my sources. Let’s begin.
After Junction Point’s closure, Oswald was not forgotten. Around the time after the first batch of Paul Rudish Mickey Mouse shorts (and Oswald’s cameo in Get a Horse!) in late 2013, Disney seemed interested in the prospect of creating a few Oswald cartoons as well (this is also when they began working on shorts in the same style for other Mickey Mouse characters like Donald and his family).
Through public copyright records, we can see the titles of the episodes from the first cancelled series (~2013/2014/2015).

• Mote Mote
• Hungry Hobos
• Blooming Season
• The Patterns
• Perfect Guide

Obviously, all of this was canned.
Before we continue, it would be a good idea to look WAYYY back, to the original cartoons. Many people believe Disney doesn’t care about the character, but they have dumped hundreds of thousands of dollars towards retrieving and restoring any of the cartoons they can. They have also funded countless projects related to him, which have failed. We are just now beginning to see finished projects being released, though unsuccessful ones have been in production since months after Junction Point closed.
Continuing, around mid-2018, work on a new Oswald show began with support from Bob Iger himself. This would have been made by the same team behind Legend of the Three Caballeros and would have been in full color with a modern art style, putting Oswald in the same league as Mickey. The existence of the project and the logo were accidentally leaked in mid-2019, when a writer overshared on LinkedIn. After the cat was out of the bag, Disney voice actor Eric Bauza teased his involvement in the project. Unfortunately, around early 2021, things just kinda fell apart, likely due to team members being moved to different projects. It was confirmed to be dead in late 2021, and a team member said more things would eventually come. And that they did… and will.
In December of last year Disney released a brand new Oswald short to social media. On April 14th, this will be rereleased on Disney+ (source).
Into the juicy stuff, a Disney animator is apparently working on a new Oswald project. If you check out their account, they have been making recent and frequent posts about it and even something work in progress that seems to be a frame from animation or a brand new render.
Excited to see where this character goes, since he is finally picking up steam.

I keep on getting this error:
Assertion failed: CurrentPos + Count <= TotalSize() [File:F:\build\LostIsland\Engine\Source\Runtime\CoreUObject\Private\Serialization\AsyncLoading.cpp] [Line: 2102]
Seeked past end of file ../../../ShooterGame/Content/Extinction/Environment/Sky/SimpleSky/T_EXT_SimpleSky_20.uasset (22370884 / 22370880)
A few seconds after I complete an orbital supply drop on extinction. I have previously played on this computer and have done the same thing without this crash. I have reinstalled the extinction DLC but that didn't work so I figure it must go deeper than that. The number at the end of name keeps changing as well.
Any help or suggestions are appreciated.

Sorry if that's a dumb question and thanks!

Don't fall for it. It's one of the more believable ones I've seen. Thread with more info here.
They even included photos of some guy with his family (prolly AI generated, since that's possible these days).
Here's one of the emails:
``` Hello,
Thank you for your interest in my apartment, it is still available. I will try to give you as many details as I can regarding the apartment in the following email.
The full address of the apartment is 2615 Telegraph Ave, Berkeley, CA 94704. Everything is just like in the pictures, fully equipped with all the appliances you need, very clean and well kept. The apartment can be rented furnished or if you want you can use your furniture and deposit mine in the storage unit. I work as an civil engineer and the company I work for has developed projects all around the world. Now, I have received a very good offer from them to move to the United Kingdom department, an offer that I have accepted.
The apartment is vacant so you can move-in anytime you want, also my contract in the UK is for the next 6 years, so for this period, I will not return 100%.
The rent of 1000$/month is for the whole apartment and includes all the utilities: heat, water, electricity, parking, laundry in-suite, washer and dryer also included, cable and internet. You will have full access to all building amenities. Just in case repairs are needed there, I will cover the costs, so no worries. The price I'm asking is below the market because I want to find a responsible tenant to take good care of the place.
I'm the owner of the apartment, it's already paid in full and there is no mortgage on it. You have everything you need near-by (public transportation, schools, groceries etc.). Also I love pets, so if you have any pets, I won't have any problem, pets are allowed. Honestly from my point of view I'm sure that You'll love it for sure and rent it on the spot.
Few questions: - I would like to know how many people will live in the apartment? - Any pets? - How long do you intend to rent the apartment for?
Please let me know if you are really interested in the place so we can discuss further.
Thank you and look forward to hearing from you! Chris
PS: I attached all the pictures that I have with the apartment (as you can see everything is in absolutely perfect condition). PS 2: Also, I have attached a few pictures with me, so you can put a face to the name. ```

So I just ordered my first pair of pitvipers and decided to go with the LA brights since i liked how they looked the most. But now after seeing that the serial number is “Barbie” im having second thoughts that they were made for women? or is it just a joke. What’s your opinion cause i don’t want to be walking around with women’s sunglasses.

I was looking at some TV jobs on workmarket, and several of them say this
"ALL PICTURES REQUIRE WHITE BOARDS EXCEPT FOR THE SERIAL NUMBER." i am assuming that they want serial numbers or something on a white board when they say this.

I know, I'm an idiot for not inspecting the gun first before starting the DROS. I'm new to guns. I paid for a rock island 1911 about a month ago and started the DROS yesterday. After the submission of the DROS, I held the handgun and noticed a scratch on the slide and the safety looked worn. I have reason to believe it was the floor model that they are trying to transfer to me (I didn't even see any traces of factory lube). I came to my LGS today to see what they can do. The LGS denied me by saying "once it's sent to the state there's no turning back, you'll have to check the warranty." After speaking to a friend working at Turners, they said I can cancel the pending DROS and redo the process. I also did research and the DOJ allows for correction of one field, which would be the serial number as I still want the same gun. Would it be possible to cancel the pending DROS and redo the process with the same gun but different serial number? The handgun is paid for already. This gun shop, though, is known for its terrible customer service. I feel like I got fleeced. I considered chargeback as well. Please help!

Hi. Recently, I've had issues with a samsung SSD (sata) drive. It is NOT a boot drive, and i just use it as a game store.
My desktop has been conducting occasional disk repairs on that SSD when i turn on my PC, unsolicited. This has happened maybe 3-4 times before, however it always completed and booted successful and seemed to function perfectly fine. Besides this, I havent received any warning signs of disk failure. Samsung disk magician and crystaldiskinfo both didnt indicate any issues with the drive.
Last night, when gaming, i restarted my PC and suddenly started getting BSOD on boot with ntfs.sys error. it didnt couldnt boot despite multiple repair attempts. Then i noticed in my bios, that the SSD had fallen out of detection by the computer. Finally i removed it and the pc booted up fine.
Further investigation had shown that the drive was now showing up in disk manager as 'Raw' file system. doing a chkdsk drive: /f has seemed to return the drive to NTFS file system and the drive is now accessible. however all drive software still says the drive is in good condition.
Is the drive dying? or could this have been a corruption event caused by overclocking my PC as ive been having stability issues. CMD when running chkdsk had shown that there were quite a number of bad segments that i think were recovered